|
800-422-8484
|
TRANSPORTATION COATINGS
AIR DRY
Kalgard® 94-Line
High performance, water based rust inhibitive coatings developed for the long term protection of castings, stampings or other ferrous surfaces. Typical uses are for brake rotors/drums, motor mounts, vibration dampeners, and more. . .
|
Dry to touch |
20 minutes |
| Preheated parts | 1 - 2 minutes |
| Gloss | 5 to 15 @ 60º |
| Salt spray | > 500 hours |
| VOC | < 1.0 lbs/gal. |
Kalgard®
870-Line
High performance urethane rust inhibitive coatings developed to have good corrosion protection as well as high heat resistance. Typical uses are for brake parts for automobiles, trucks, and others.
|
Dry to touch |
30 minutes |
| Gloss | low to medium |
| Salt spray | to 240 hours |
| VOC | < 2.0 lbs./gal. |
K2 - WB Epoxy Enamel
K2 water reducible epoxy is a two component coating that provides up to 1000 hours salt spray resistance. K2 air dries to handle in 30 minutes, cleans up with water and has less than 1.5 pounds per gallon VOC.
K2 uses a unique, non-isocyanate crosslinker that provides up to 9 hours pot life and 2H pencil hardness. K2 can be re-coated and is available in a wide range of colors and gloss levels.
|
Dry to touch |
30 minutes |
| Preheated parts | 5 minutes |
| Gloss | low to high |
| Salt spray | 1000 hours |
| VOC | < 1.5 lbs./gal. |